Winter mountain biking may be fun, or elsewhere in the snow, but snow will certainly hurt your Utility Vehicle Manufacturer. After returning home, the car also need special care, cleaning oil, or wait until the next ride, see the car on the mottled with mud, it may be extremely remorseful, so quickly hands it to maintain our car !
In fact, this cleaning is very simple, only needs a simple three-step has made the car a new look, but also can reduce the possibility of future maintenance.
The first is to prepare the tools: toothbrush, rags, grease, lubricants, rust inhibitors (such as WD-40) and so on. Not need to use special tools to the premise, so that each fan can be simple and easy maintenance of your car in person.
The first step, clean. If the body is not dirty, wipe with a damp soft cloth can be; more if the mud can be washed with water, to note that the water column pressure can not be too high. At the same time axis, bowl sets and other rotating parts can not be washed with water directly. For less than the local rag wipe can be used toothbrush. The fork tube at the sediment should be removed with a toothbrush will avoid shock caused by scratching. Rims, brake blocks need cleaning. Embedded in the brake block out the magazine, to reduce unnecessary wear and tear. Brake, transmission lines have to wipe clean, if more sediment can be removed-ray tube, using rust inhibitor spray pressure to clean house. Chain, the whole car most likely to smoke gray areas, wipe the stain with a rag, if very dirty, rust inhibitor can be used for cleaning, remember to dry after the chain, to facilitate the subsequent chain of oil.
The second step, refueling. Brake, transmission line pipe in the need to re-oiling after cleaning, liquid fats and oils weak line pipe used for oil. Transmission chain is an important part, while oil has very high demands. Drops to 5-6 on the general time. After the increase, let the chain to fully rotate, while the gear oil to the various on-chip, after increases, but also dry the chain with a rag. The fork tube, after the removal of sediment, but also use special lubricants, so smooth fork action is still in the winter.
The third step, rust-proof. Mountain bike on the various screws, transfer point, after the ride, the proposed cast some rust, the one rust, and second, is also good for the future demolition. There is an article here describes the WD40, can be simply understood, it is also their company's own production of a very happy and funny promotional video>> parts of the world's top electric power chair brands Profile - WD-40
More work done, your car again with a new look to meet the next challenge. Of course, bicycle maintenance where needed far more than these, we can according to the maintenance of the vehicle. For example, adjustment of tire pressure, air pressure checks fork.